Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and generally fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning to try to remove the glass panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you start working on the glass so that any fragments of glass fall on the fabric instead of landing on the floor where they could be trodden under and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional comes out and fix the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap between the door and the window is substantial, uPVC window repairs you may prefer a security screen that also has an opening. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may develop a number of problems that include sagging. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges could aid in fixing a window which is sliding. To accomplish this, you'll need open the window so that you can get to the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit of your window, you can tighten screws to secure them in the right position.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals can dry out and UPVC Window Repairs lose their elasticity over time, which causes them to loosen. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows remain watertight and safe from drafts.

uPVC handles could also loosen. This is typically caused by screws that have been removed over time, but it could be due to the mechanism of the handle wears out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and perform an initial test to ensure that it fits. The corners of the sash need to align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on how severe the problem is, the old caulking may have to be removed. It is crucial to remember that when it is about upvc window repairs [www.repairmywindowsanddoors.co.uk blog entry], do avoid the temptation to "over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more serious instances, you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leak originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. This can be easily fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens with an ease. They can be repaired by any skilled DIYer and are usually completed in just a few minutes.

Like any mechanical part, hinges can be damaged over time. It's very simple to change a window hinge but it's much easier if someone helps you hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be happy to give you advice.

Regular lubrication of the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also be misaligned due to wear, which can cause a gap between the frame and sash. If they are beyond repair, it could be required to realign them. Secondly the interlock, this is located on the hinge of the window, can also be misaligned, and again it is possible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures, and reduce the risk of draughts.

Another, and most effective methods to reduce draughts is by using a draught excluder, these are usually fabric tubes which are filled with a type of filler. They can be positioned on the windowsill on top. They can help block out cold air and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. However, it is important to recognize that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than repair them. So, if you are experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as possible.